流体压力转换、自动化压力检测和压力控制 设备生产、销售 — 企业

注重工作细节,提高服务品质

服务热线:
13206405565
您的位置:主页 > 产品中心 > 气驱液体增压泵 气动液压泵

气动液压泵

简要描述:气动液压泵将较低的空气压力转换成高压油,即利用大面积活塞端的低气压产生小面积活塞端的高液压。可以代替手动或电动液压泵与锚索张拉机具、退锚机、锚杆拉力计或其他液压工具配套使用 The pneumatic hydraulic pump converts the lower air pressure into high-pressure oil, that is, the low air pressure at the large area piston end is used to generate the

  • 更新时间:2021-10-14 00:42:30
  • 访  问  量:336
详细介绍

  气动液压泵将较低的空气压力转换成高压油,即利用大面积活塞端的低气压产生小面积活塞端的高液压。可以代替手动或电动液压泵与锚索张拉机具、退锚机、锚杆拉力计或其他液压工具配套使用

The pneumatic hydraulic pump converts the lower air pressure into high-pressure oil, that is, the low air pressure at the large area piston end is used to generate the high hydraulic pressure at the small area piston end. Instead of manual or electric hydraulic pump, it can be used together with anchor cable tensioning machine, anchor retractor, anchor bolt tension meter or other hydraulic tools;

气动液压泵原理:

  气动液压泵(气驱液压泵)可以冲水,充油或填充化学介质。气体驱动压力范围为1-10bar。其工作原理类似于往复循环的增压器。其底部活塞由二位四通先导阀来控制。

Principle of pneumatic hydraulic pump:

Pneumatic hydraulic pump (pneumatic drive hydraulic pump) can flush, fill oil or fill chemical medium. The gas drive pressure range is 1-10bar. Its working principle is similar to that of a reciprocating supercharger. The bottom piston is controlled by a two position four-way pilot valve.

气动液压泵为自填充型泵,一般来说,无需使用空气管线润滑器。当驱动活塞向上运行时,将液体吸入泵内,此时入口处的单向阀打开,出口单向阀关闭。当活塞向下运行时,在液体一侧会形成压力,压力会将入口处单向阀关闭,出口处单向阀打开,气动液压泵能够实现自动循环。当出口压力升高时,气动液压泵会减速运行,并对差动活塞产生阻力,当力平衡时,气动液压泵自动停止运行。当出口压力降低或气体驱动压力增加时,气动液压泵会自动启动运行。

Pneumatic hydraulic pumps are self filling pumps and generally do not require the use of air line lubricators. When the driving piston runs upward, the liquid is sucked into the pump. At this time, the check valve at the inlet is opened and the check valve at the outlet is closed. When the piston runs downward, a certain pressure will be formed on the liquid side, which will close the check valve at the inlet and open the check valve at the outlet. Pneumatic hydraulic pump can realize automatic circulation. When the outlet pressure increases, the pneumatic hydraulic pump will slow down and produce a certain resistance to the differential piston. When the force is balanced, the pneumatic hydraulic pump will automatically stop running. When the outlet pressure decreases or the gas drive pressure increases, the pneumatic hydraulic pump will start automatically.

 

气动液压泵原理

  

气动液压泵用途:

  气动液压泵广泛应用于冶金、矿山、船舶、机械、石油化工等领域。特别适合煤矿井下有防爆要求的场合使用。

Application of pneumatic hydraulic pump:

pneumatic hydraulic pump is widely used in metallurgy, mining, shipbuilding, machinery, petrochemical and other fields. It is especially suitable for occasions with explosion-proof requirements in coal mines.

气动液压泵优点:

  气动液压泵可靠、输出压力高、操作简便、携带方便等优点。

  可保持在任何预定压力下,不再消耗能量和产生热量

  不产生热量,不会有火花和火焰危险;

  压力线性输出,容易人工控制;

  达7000帕的增压能力,满足大多数高压需要;

  容易应用于自动控制系统中;

  连续启停,不受限制,并无不良影响;

  气动活塞环及其他气动部件在工作状态时不需要添加润滑油,节省运行成本,并可防止油气污染环境;

  轻便可靠,易于维护,坚固耐用。

  以压缩空气为动力源,不需使用电源;

  运行时无油润滑。

Advantages of pneumatic hydraulic pump:

The pneumatic hydraulic pump has the advantages of safety and reliability, high output pressure, simple operation and convenient carrying. It can be kept under any predetermined pressure, no energy consumption and heat generation, no heat generation, no spark and flame hazard; Linear pressure output, easy manual control; Up to 7000 PA pressurization capacity to meet most high-pressure needs; Easy to apply in automatic control system; Continuous start and stop, unrestricted and without adverse effects; Pneumatic piston rings and other pneumatic components do not need to add lubricating oil in working state, which can save operation cost and prevent oil and gas from polluting the environment; Light and reliable, easy to maintain, strong and durable. Compressed air is used as the power source without power supply; No oil lubrication during operation.

详细参数请查阅气驱液体增压泵,也可按照您的要求定制各种流量及压力的增压泵

For detailed parameters, please refer to the gas driven liquid booster pump, or customize the booster pump with various flow and pressure according to your requirements

留言框

  • 产品:

  • 您的姓名:

  • 联系电话:

联系方式 二维码

服务热线

13206405565

扫一扫,关注我们